Sliding Door Hardware Manufacturer & Supplier · China · Since 2000

Sliding Door Hardware: Rollers, Tracks, Locks, Handles and Synchronized Systems – A Complete Guide from the Factory

Sliding door hardware is every part that makes a sliding door carry its weight, move, close and lock: rollers and tracks, guides and stoppers, locks and keepers, handles, frame corner joints and seals. HIPAD has made rollers since 2000 and now supplies the full hardware set for aluminum patio doors, interior sliding doors, wardrobes and glass sliding systems, including a 2+1 synchronized sliding system. Profile system companies, door and window factories and distributors in 60+ countries buy complete sets or single parts from our factory.

Rollers · tracks · guides
Locks · handles · keepers
Corner joints · seals
2+1 synchronized system
Aluminum · glass · interior doors
OEM since 2000

Request Hardware Catalog & Price See the Parts of a Sliding Door

Aluminum sliding patio doors fitted with HIPAD sliding door hardware

What Is Sliding Door Hardware?

A sliding door moves along a track instead of swinging on hinges. Its hardware splits into four jobs. Carry and move: rollers, tracks, top guides and stoppers. Close and seal: interlock profiles, brush seals and weatherstrips. Lock and operate: sliding door locks, keepers and handles. Hold the frame together: corner joints and connectors in the aluminum profile.

The same names cover very different doors: a heavy aluminum patio door rolling on a sill track, a wooden or glass door hanging from an overhead rail, a wardrobe door, or a synchronized interior door where two panels open together. The right hardware depends on the door system, panel weight and frequency of use. In Spanish the parts are often called herrajes para puertas corredizas o accesorios para puertas corredizas, and rollers roldanas.

HIPAD Sliding Hardware: Key Facts

Fabricante: HIPAD, Qingdao, China; roller and bearing production since 2000
Range: rollers, track and strip roller systems, sliding door locks, handles, corner joints, seals and accessories
System: Short Track 2+1 synchronized sliding door system, 35–100 kg doors
Locks: sliding door locks for 30–60 mm doors; mortise locks for 35–70 mm
Doors: aluminum patio and balcony doors, interior and wardrobe doors, glass partitions and sliding showers
In-house: 60+ injection molding machines, 2000+ mold sets
Cómo hacer un pedido: samples 5–7 days · production 20–25 working days · FOB Qingdao

Parts of a sliding door

The Parts of a Sliding Door System

The drawing shows a two-panel aluminum sliding door. Each numbered part links to the HIPAD range that supplies it.

Two-panel aluminum sliding door. Not to scale.

#	Part	Función	HIPAD range
1	Top track and guide	Keeps the panel upright and in line	Track systems
2	Rodillos	Carry the panel weight and let it slide	rodillos para puertas correderas
3	Bottom track	Running surface for the rollers	Track systems
4	Lock and keeper	Hook or latch that locks the panel to the frame	Sliding door locks
5	Manejar	Flush pull or lever handle that operates the lock	Manillas y tiradores para puertas y ventanas
6	Uniones de esquina	Join the aluminum profiles at the sash corners	Uniones de esquina
7	Interlock seal	Brush or rubber seal where the panels meet	Juntas y accesorios
8	Stoppers and guides	Stop the panel at the end of travel and guide it	Juntas y accesorios

HIPAD sliding hardware ranges

Sliding Door Hardware from Our Factory

Each range has its own page with models and specifications. Order single parts or a complete set matched to your profile system.

Tandem sliding door roller in steel housing

Move

Rodillos para puertas corredizas

Single, tandem, embedded and strip rollers with nylon, POM, PU or steel wheels and ZZ / RS bearings.

Move

Track & Strip Roller Systems

Matched tracks and strip rollers for doors, cabinets and linear sliding applications.

Short Track 2+1 synchronized sliding door system kit

Sistema

2+1 Synchronized Sliding System

Belt-driven short-track system for interior doors and wardrobes, 35–100 kg, 70 mm soft-stop buffer.

Bloquear

Aluminum Sliding Door Locks

Hook and flush locks for aluminum sliding doors 30–60 mm thick, with or without key.

Operate

Sliding Lock Handles

Compact lock handles for aluminum sliding windows and light sliding doors.

Operate

Manillas para puertas y ventanas

Flush handles, lever handles and handle sets in aluminum and zinc alloy for door and window systems.

marco

Escuadras de unión

Corner joints and angle brackets that hold aluminum door and window sashes square.

Seal

Seals & Accessories

Weatherstrips, brush seals, stoppers and small parts that finish the door.

Step 1 · Door system

Types of Sliding Door Systems and the Hardware Each Needs

Respuesta rápida: bottom-rolling aluminum patio doors need rollers, a sill track, a hook lock and a flush handle; top-hung interior, barn-style and glass doors need hanging rollers on an overhead rail with a floor guide; wardrobes use light bypass rollers; and synchronized doors add a belt or cable that moves two panels together.

Sistema	How it works	Key hardware	Uso habitual	HIPAD supply
Bottom-rolling aluminum door	Panel rolls on rollers in the bottom rail along a sill track	Tandem or embedded rollers, top guide, hook lock, flush handle, corner joints, brush seals	Patio and balcony doors, shop fronts	Complete hardware set
Sliding window	Same as above at a smaller scale	Window rollers, crescent or hook lock, lock handle, corner joints	Aluminum and uPVC windows	Complete hardware set; see Herrajes para ventanas
Top-hung interior door	Door hangs from rollers on an overhead track	Hanging rollers, top track, floor guide, stoppers, soft-close	Interior rooms, pocket doors	Hanging rollers and roller systems
Synchronized (2+1)	A belt links the panels so they open together	Short track, carriages, belt, buffers	Interior doors, wardrobes, partitions	Complete 2+1 system
Wardrobe bypass door	Two or more doors pass each other on parallel tracks	Light top or bottom rollers, guides	Closets and cabinets	Wardrobe rollers
Frameless glass sliding door	Glass hangs from rollers on a rail or tube	Glass clamp rollers, rail, stoppers, floor guide, pull handle	Showers, glass partitions, barn-style glass doors	Sliding glass systems

Featured system

Sistema de puertas correderas sincronizadas Short Track 2+1

In a synchronized sliding system, pulling one door panel moves the linked panel at the same time, so a wide opening clears in one movement. The HIPAD Short Track 2+1 system uses a belt drive on a short, low track, which keeps the visible hardware small. A buffer at each end slows the doors over the last 70 mm so they close softly.

Sliding structure	Belt-driven synchronized sliding
Peso de la puerta	35–100 kg
Buffer stroke	70 mm
Minimum door leaf	≥ 520 mm wide
Service life (stated)	80,000 cycles
Materials	Metal and engineering plastic
Uses	Interior doors, wardrobes, commercial partitions

See the 2+1 specification guide for what to confirm before ordering.

Interior synchronized sliding doors with the HIPAD Short Track 2+1 system

Step 2 · Lock and handle

Sliding Door Locks and Handles: How to Choose

A sliding door lock usually uses a hook that swings into a keeper on the frame, because a sliding panel cannot use a normal latch bolt. Choose the lock by door thickness and profile, then choose a handle that fits the lock spindle and the profile face.

Typical HIPAD lock ranges; see door and window locks.
Lock type	Use	Door / frame	Materiales
Sliding door hook lock	Puertas correderas de aluminio	30–60 mm doors	Aleación de zinc
Cerradura de embutir	Aluminum doors with lever handles	35–70 mm doors	Steel and zinc alloy
Crescent lock	Ventanas correderas	Window frame systems	Aluminio
Multi-point lock	Entrance and large doors	40–80 mm doors	Steel core

Handles in aluminum and zinc alloy, anodized, powder coated or plated; see custom handle sets.
Handle type	Use	marco
Flush (recessed) handle	Sliding windows and doors, panels that pass each other	30–60 mm
Lock handle	Sliding windows and light doors	Profile-specific
Lever handle with lock	Aluminum doors with mortise lock	35–60 mm
Pull handle	Glass and timber sliding doors	Through-fixed or face-fixed

Step 3 · Door weight

Match the Hardware to the Door Weight

Door weight drives the roller choice and affects the track, lock and handle. Estimate it first: glass weighs about 2,5 kg por m² por milímetro, and an aluminum frame adds roughly 20–30%. A 1000 × 2200 mm sash with 5 + 5 mm double glazing weighs about 69 kg.

Choose rollers rated for at least 1.5 times the weight each roller carries. Our roller load guide explains the calculation step by step.

Typical planning ranges. The rated load of each HIPAD model is confirmed against your drawing.
Panel weight	Typical hardware
Up to 40 kg	Window rollers, wardrobe rollers, light top-hung rollers
35–100 kg	2+1 synchronized system for interior doors
40–80 kg	Single-wheel door rollers with bearings
80–150 kg	Tandem or embedded rollers, heavier track
Above 120 kg	Roller strips with 4–8 wheels or steel-wheel heavy-duty rollers

Ordering

Hardware List for One Aluminum Sliding Door Panel

A typical parts list per sliding sash. Your profile system decides the exact models; send the profile drawing and we return a matched list.

Part	Qty per sash
Rollers (single, tandem or embedded)	2
Top guides or guide blocks	2
Sliding door lock with keeper	1 set
Handle (flush or lever)	1 set
Uniones de esquina	4
Stoppers / bumpers	1–2
Interlock brush or rubber seal	By sash height
Junta de sellado	By sash perimeter

Materials and Finishes

Part	Common materials	Acabados
Roller housings	Galvanized steel, stainless steel 304 / 316, aluminum, nylon	Zinc plated, stainless
Roller wheels	Nylon, POM, PU, steel	Wheel color by choice
Cerraduras	Zinc alloy, steel	Plated, black, powder coated
Handles	Aluminum, zinc alloy	Anodized, powder coated, plated
Uniones de esquina	Aluminum, zinc alloy	Mill or coated

For bathrooms, pools and coastal buildings, specify stainless steel roller housings and sealed (RS) bearings.

Sliding Door Hardware by Application

Residential Sliding Doors

Quiet rollers, soft-close options and slim handles for patio, balcony and interior doors.

Glass kitchen partition with sliding doors

Kitchen & Pantry Partitions

Light rollers and slim handles for space-saving glass and aluminum partitions.

Commercial Entrances

Heavy-duty rollers, locks and pull handles for high-traffic shop and office doors.

Sliding Shower Doors

Stainless steel rollers, rails and stoppers for 8–12 mm frameless glass.

Project references: residential sliding doors, California, USA y apartment glass doors with sliding rollers, Vancouver, Canada.

Installation and Adjustment

Assemble the sash with corner joints and check it is square before fitting hardware.
Fit the rollers near each end of the bottom rail and the guides in the top rail.
Fit the lock body and handle to the profile drawing; check the hook travel.
Lift the sash into the frame, lower it onto the track and fit the top guides.
Adjust the rollers until the sash runs level with even gaps, then set the keeper so the hook engages fully.
Fit stoppers, interlock seals and weatherstrips, then test the full travel and the lock.

Problemas habituales y soluciones

Problema	Causa probable	Corregir
Door hard to slide	Worn rollers or dirty track	Clean the track; adjust or replace rollers
El cerrojo no encaja	Keeper and hook out of line	Re-level the rollers, then reset the keeper
Draughts or rattling	Worn interlock or brush seals	Replace seals and weatherstrips
Door jumps the track	Wrong roller groove or worn top guide	Match the roller to the track; replace guides
Synchronized doors out of step	Belt tension or carriage position	Re-tension the belt and reset the carriages

¿Por qué comprar en HIPAD?

Sliding Hardware from a Roller Factory

HIPAD began in 2000 with bearings and rollers, the core of every sliding door. From 2016 we used that experience to build complete sliding systems, and today we supply rollers, locks, handles, corner joints and accessories as one matched set. Wheels are molded on our own injection machines, and every set is checked for fit against the customer's profile before mass production.

25+years of roller and bearing production

60+máquinas de moldeo por inyección

2000+juegos de moldes para una personalización rápida

60+países a los que se suministra

Control de calidad

Incoming checks of resin, steel, zinc alloy and bearings
Profile-fit checks of rollers, locks and corner joints against samples
Rolling cycle and load checks on rollers; operation checks on locks
Finish inspection and export packing checks

HIPAD is ISO 9001 certificados, y los productos correspondientes llevan CE, GS y CSA C-UL certification. SGS or BV third-party inspection is available.

OEM / ODM sliding hardware

Match rollers, locks and handles to your profile system
Private molds for exclusive parts
Wheel colors, finishes and logo on housings
Kit packing per door or bulk packing, incluso para cantidades pequeñas

1. Profile or sample	Send a profile drawing, sample or parts list
2. Muestras	5–7 days for existing models
3. Producción	20–25 working days · MOQ from 1000 pcs by model
4. Envío	FOB Qingdao or any China port · 30% deposit, 70% before shipment

Sliding door guides

More Guides on Sliding Door Hardware

Sliding Door Rollers: Types, Sizes, Bearings and LoadThe complete roller selection guide
What Are the Three Types of Sliding Doors?Sliding glass, pocket and bypass doors compared
Sliding Glass Door Hardware GuidePatio door components and replacement parts
Sliding Door Fitting GuideHardware, glass and installation tips
Sliding Door Lock: OEM Selection GuideHook vs latch, handing and approval checks
Short Track Sliding Door System: 2+1 Specification GuideWhat to confirm before ordering
Ghost Door Hardware for Modern InteriorsConcealed sliding hardware
Is a Sliding Door a Good Idea for a Bathroom?Sliding vs hinged shower doors

Sliding Door Hardware Terms

Término	Significado	También se conoce como
Sash	The moving panel of a sliding door or window	Leaf, panel
Interlock	Profile where two panels overlap when closed	Meeting stile
Hook lock	Lock whose hook swings into a keeper	Sliding door latch, cerradura de gancho
Portero	Plate on the frame that receives the hook	Strike, catch
Flush handle	Recessed handle that lets panels pass each other	Flush pull, recessed pull
Synchronized door	Panels linked so they open together	Telescopic door, 2+1 system
Soft-close	Damper that slows the door at the end of travel	Buffer, soft stop
Corner joint	Insert that joins two profiles at a corner	Corner cleat, corner connector

Sliding Door Hardware FAQ

¿Qué herrajes se necesitan para una puerta corredera?

Una puerta corredera necesita ruedas y un riel para soportar y desplazar el panel, guías superiores y topes, una cerradura con cerradero, un tirador y juntas de sellado en el cruce y alrededor del marco. Las puertas correderas de aluminio también necesitan escuadras de unión para ensamblar la hoja.

¿Cuál es la diferencia entre las puertas correderas suspendidas y las de rodadura inferior?

En una puerta de rodadura inferior, el peso se apoya en rodamientos situados en el riel inferior que se desplazan sobre una guía en el suelo o umbral, lo cual es ideal para puertas de aluminio pesadas para terrazas o patios. En una puerta suspendida, el peso cuelga de rodamientos en una guía superior y la guía del suelo solo mantiene la puerta alineada, lo cual resulta adecuado para puertas de interior, tipo granero y de vidrio.

¿Cómo funciona una puerta corredera sincronizada?

Una correa o cable une los paneles, de modo que al tirar de uno se mueve el otro al mismo tiempo y el vano queda despejado en un solo movimiento. El sistema HIPAD Short Track 2+1 funciona mediante correa, soporta puertas de 35–100 kg y cuenta con un amortiguador de cierre suave de 70 mm.

¿Qué tipo de cerradura se utiliza en una puerta corredera de aluminio?

La mayoría de las puertas correderas de aluminio utilizan una cerradura de gancho que se encaja en un cerradero fijado al marco. Las cerraduras para puertas correderas HIPAD se adaptan a puertas de 30–60 mm de grosor y están disponibles con o sin bombín.

¿Cómo elijo las ruedas para una puerta corredera?

Calcule el peso del panel, divídalo entre las ruedas y elija ruedas con una capacidad nominal de al menos 1,5 veces esa proporción. A continuación, haga coincidir la ranura de la rueda con el riel y la carcasa con la cavidad del perfil. Nuestra guía de ruedas para puertas correderas explica cada paso.

¿Pueden suministrar un juego completo de herrajes para nuestro sistema de perfiles?

Sí. Envíenos el plano del perfil o una puerta de muestra. Adaptamos rodamientos, guías, cerraduras, tiradores, escuadras de unión y juntas, y podemos embalarlos en un kit por puerta o al por mayor.

¿Qué materiales son los más adecuados para los herrajes de puertas correderas cerca del mar?

Utilice carcasas de roldana de acero inoxidable, rodamientos sellados (RS) y cerraduras y manillas galvanizadas o con recubrimiento en polvo. El acero cincado convencional se corroe más rápido en zonas costeras y áreas de piscinas.

¿Cuál es la cantidad mínima de pedido (MOQ) y el plazo de entrega?

La cantidad mínima de pedido (MOQ) parte de 1000 unidades y depende del modelo. Las muestras de modelos existentes tardan de 5 a 7 días y la producción en serie de 20 a 25 días laborables. La personalización del logotipo y del embalaje está disponible incluso para pequeñas cantidades.

¿Es HIPAD un fabricante o una empresa comercial?

HIPAD es un fabricante fundado en 2000 en Qingdao, China, que comenzó con rodamientos y ruedas y ahora produce sistemas completos de herrajes para puertas correderas con sus propios moldes y máquinas de inyección. HIPAD cuenta con la certificación ISO 9001. Qingdao Hipad International Trade Co., Ltd. se encarga de la exportación.

Última actualización: octubre de 2026 · Revisado por Allen, ingeniero técnico de HIPAD

Related Hardware

Rodillos para puertas corredizas Cerraduras para puertas y ventanas

Door & Window Locks Window hardware

Herrajes para ventanas Herrajes para puertas corredizas de ducha

Sliding Shower Hardware

Send Your Sliding Door Hardware Requirements To HIPAD

¿Por qué elegirnos?

A roller and sliding hardware factory since 2000, supplying profile system companies, door and window factories, distributors and importers in 60+ countries. Our commitment includes:

Certificación ISO 9001; marcas CE, GS y CSA C-UL para los productos correspondientes; posibilidad de inspección por parte de SGS / BV
Rollers, locks, handles, corner joints and seals matched to your profile, from one factory
Muestras en 5-7 días; producción en serie en 20-25 días laborables
OEM / ODM: profile matching, colors, logo and kit packing, even for small quantities

Send your profile drawing, door size and weight. We reply within 24 hours with a matched hardware list and a factory price.

Solicita un presupuesto

Solicite una cotización

Responderemos en un plazo de 24 horas. Para solicitudes urgentes, contáctenos por WhatsApp/WeChat al +86 137 9191 8989 o llame directamente al mismo número.

*Respetamos la confidencialidad de sus datos y protegemos toda la información.

Solo utilizaremos su información para responder a su consulta y nunca enviaremos correos electrónicos ni mensajes promocionales no solicitados.